PERFORMANCE

The MasterBuilt Performance Line is our highest value cable product. Utilizing laboratory-grade 99.999% pure copper made in U.S. foundries, along with proprietary winding geometry to reduce inductance and capacitance and with very high quality connectors, the MasterBuilt Performance Line is an exceptional product that will bring your system to life, and at a reasonable price. Aerospace signal transmission technology can be yours now, so if you have spent upwards of $25,000 or more on your system, this would be the correct choice for best sound.

Power Cords

IMPORTANT NOTE ABOUT POWER CORDS: Audiophiles should realize that the first component in the system is the power cord. This “first component” must be distortion-free and able to conduct a very large amount of current and voltage into the component. It is known that the musical signal consists of voltage and current sourced from the a.c. wall outlet, and the electrical components simply “modulate” that power into a musical waveform. Inexpensive or improperly designed power cords will add distortion or remove quality of the signal. For that reason, a high quality and non-reactive power cord should be used; once the signal has been corrupted, it is impossible to reverse this damage regardless of the quality of components that follow.

Although highly affordable, the Performance Line power cord can elevate your system to a performance level you might not think was possible. These MasterBuilt power cords will finally let you hear what your high quality components can do with your favorite music, since the design and materials of Performance Line are state-of-the-art at this price point utilizing high purity U.S. Laboratory grade copper with the most advanced insulation and winding geometries available.

SPECIFICATIONS
Outer Jacket: High Density Thermoplastic Elastomer with Polyester braided sleeve
Construction: Low EMF Hexagonal
Conductor Insulation: Fluoropolymer
Conductor Material: U.S. laboratory grade 99.999% high conductivity pure copper, concentric stranding
Conductors: 6 with proprietary vibration dampening
Gauge: 14 AWG per leg (Ground, Hot and Neutral)
Cable Power Rating: 30 Amp max
AC Power Connector: High conductivity copper alloy (Phosphor Bronze), unplated
IEC Connector: High conductivity copper alloy (Phosphor Bronze), Silver plated
Finishes: Purple (standard), Black (upon request)

Interconnects

Interconnect cables have a difficult job to perform. Low-level voltages from the source to the preamp and power amp are delicate and are prone to being corrupted with excess resistance, inductance, and capacitance (called “reactances”). Performance Line interconnects were designed to eliminate nearly 100% of the distortion and coloration caused by ordinary cables. These are designed to be successfully used in an environment polluted with EMI and RFI distortion, as they have superior shielding per U.S. aerospace requirements. As these interconnects use laboratory-grade materials manufactured using proprietary methods in the U.S., they offer an extremely high performance to cost value ratio. Therefore, the Performance Line Interconnects deliver the highest level of accuracy possible at this low price point. Available in single-ended RCA and balanced XLR configurations, the Performance Line Interconnects will exceed your expectations, no matter what cables you own now.

SPECIFICATIONS
Outer Jacket: Polyester braided sleeve
Shielding: Dual layer (Aluminum Foil and Tinned Copper braid)
Construction: Tri-Axial Balanced, low EMF design
Conductor Insulation: Fluoropolymer
Conductor Material: U.S. laboratory grade 99.999% high conductivity pure copper, concentric stranding
Conductors: 3 (Ground, Positive and Negative)
Gauge: 20 AWG per leg (Ground, Positive and Negative)
Terminations: High conductivity copper alloy with gold plating
Finishes: Purple (standard), Black (upon request)

Digital Cable

Although the digital binary bit stream is robust, there are many ways that this signal can be corrupted by low quality cables. Our digital cables are design to have an optimized impedance as per the type of cables: SPDIF ~ 75ohm; USB ~ 90ohm; AES/EBU ~ 110ohm. Furthermore, the connector and cable design are optimized to achieve the least amount of losses (ie. insertion loss and return loss) for the digital signal transfer between the transport/server and DAC. The benefit of our cable design, high grade conductors, and materials translate to a digital cable with low jitter and attenuation loss. Performance Line Digital Cables benefit from the same proprietary elements of the rest of this line and provide the highest value performance possible in its class.

SPECIFICATIONS
Outer Jackt: Polyester braided sleeve
Shielding: Dual layer (Aluminum Foil and Tinned Copper braid)
Conductor Insulation: Low dielectric constant Polypropylene
Construction: Twisted pair plus ground and voltage conductors
Conductor Material: U.S. laboratory grade 99.999% high conductivity pure copper, concentric stranding
Conductors: 4 (this exceeds USB 2.0 specification)
Gauge: 22 AWG per conductor
Terminations: High conductivity copper alloy with gold plating
Finishes: Purple (standard), Black (upon request)

Speaker Cables

The entire signal path is critical to the overall performance of your system. It has the same impact as any other key component. Simply stated, your system will only sound as good as its weakest link. Speaker cables are the final leg of that signal path and any degradation in signal nullifies the quality of components both before and after it.

Reactances such as capacitance, inductance, and resistance will modify the signal being transferred from the amplifier to the speaker. In fact, the crossover circuits inside your speakers use capacitors, inductor coils, and resistors to divide the frequencies. The combination of resistance, capacitance, and inductance is a potential source of coloration which can be seen as a distortion of the original signal.

MasterBuilt Performance Line Speaker Cables sound neutral because they have the least reactance due to their U.S. laboratory grade pure copper wire, the highest quality insulation available and proprietary design technology. Put simply, this is the highest value speaker wire on the market.

SPECIFICATIONS
Outer Jacket: High Density Thermoplastic Elastomer with Polyester braided sleeve
Construction: Balanced Quad
Conductor Insulation: Low dielectric constant Polypropylene
Conductor Material: U.S. laboratory grade 99.999% high conductivity pure copper, concentric stranding
Conductors: 4 for single wiring; 8 for bi-wire
Gauge: 12 AWG per leg (Positive & Negative)
Cable Power Rating: 40 Amps max
Terminations: High conductivity copper alloy with gold plating
Finishes: Purple (standard), Black (upon request)